# Third-party content in the studio assets

Everything else here (the garage-lab and its facade, doors, forecourt and
terrace, the stations, the inspection cell, the weld work pieces, the GM
analyst desk and its AI tower, the props, the F1 diorama, the tyre rack and
trolleys, the diorama cars, the parked F1 car in `hero_car.glb`, the terminal,
the boxes, the painted textures and the baked lighting) was made for this site
by the pipeline in `tools/studio/` and the hero-car agent. The panorama of the
bay and the far shore (day and night), the framed dome line study, the scan
print, the Monaco board (town, harbour, turn plates and names) and the tyre
sidewalls and treads are procedural paintings made by `tools/studio/textures.py`
(no photographs or third-party images). The tyres carry only generic compound
words (SOFT, MEDIUM, HARD, INTER, WET): no tyre maker's name or mark. The cars
carry no real team, sponsor or maker marks. The AMR models under `assets/` are
the owner's own and are not covered here.

## UR5e robot arm: BSD-3-Clause

`ur5e.glb` and `ur5e-lite.glb` contain the UR5e visual meshes and kinematics
(link meshes `meshes/ur5e/visual/*.dae`, `config/ur5e/*.yaml`) from
**Universal Robots ROS 2 Description**,
https://github.com/UniversalRobots/Universal_Robots_ROS2_Description
(commit 6662e15f32c23c12ece57d0050aee9a716e4fc41).

The meshes were converted from COLLADA, decimated and recoloured. A simple
parallel gripper was added; it is not a UR or third-party product.
The repository's README says that all content other than the UR8LONG, UR15,
UR18, UR20 and UR30 meshes is licensed under BSD-3-Clause, so the UR5e meshes
are under the licence below. The repository's LICENSE file does not name a
copyright holder; the package is published by Universal Robots A/S and its
contributors.

```
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

   * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

   * Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in the
     documentation and/or other materials provided with the distribution.

   * Neither the name of the copyright holder nor the names of its
     contributors may be used to endorse or promote products derived from
     this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
```

## Poly Haven models: CC0 1.0

These models from https://polyhaven.com are in the public domain (CC0 1.0).
No attribution is required, but credit is given gladly. The site uses their
geometry and diffuse textures, downsized into `studio.glb`'s texture atlas.
Maker marks printed on the pliers, screwdriver and tape measure textures were
painted out.

| Model | Used as | Authors |
|---|---|---|
| [Desk Lamp Arm 01](https://polyhaven.com/a/desk_lamp_arm_01) | the desk lamp (clamp replaced with a weighted base) | Yann Kervran, Kuutti Siitonen |
| [Retro Multimeter](https://polyhaven.com/a/retro_multimeter) | multimeter | elli moeller |
| [Pliers](https://polyhaven.com/a/pliers) | pliers (desk and pegboard) | PierreB3D |
| [Screwdriver](https://polyhaven.com/a/screwdriver) | screwdriver (desk and pegboard) | PierreB3D |
| [Measuring Tape 01](https://polyhaven.com/a/measuring_tape_01) | tape measure | Kuutti Siitonen |
| [Circuit Board](https://polyhaven.com/a/circuit_board) | circuit board, scaled down | Benny Weimer |
| [Combination Wrench](https://polyhaven.com/a/combination_wrench) | wrenches on the pegboard | BKS |

## Poly Haven textures: CC0 1.0

Diffuse maps from https://polyhaven.com, tiled into the albedo atlas or used
as repeating wall/floor textures.

| Texture | Used as | Authors |
|---|---|---|
| [Wood Table Worn](https://polyhaven.com/a/wood_table_worn) | the desk top | Dimitrios Savva, Rico Cilliers |
| [Concrete Floor Worn 001](https://polyhaven.com/a/concrete_floor_worn_001) | the garage floor and the forecourt | Dimitrios Savva, Rico Cilliers |

## Circuit de Monaco layout: MIT

The F1 diorama's track (`track` in studio.glb, `track.points` in
manifest.json) follows the Circuit de Monaco centreline from
**bacinger/f1-circuits**, https://github.com/bacinger/f1-circuits
(`circuits/mc-1929.geojson`). It was rotated and rescaled for the board
(about 1:605), lightly smoothed, opened a little at the Grand Hotel hairpin so
a four-car-wide track fits, and resampled to 600 points. The turn names on the
board are the corners' public names.

```
Copyright (c) 2019-2025 Tomislav Bacinger

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
```

The F1 cars in `f1car.glb` are generic models with made-up colourways; no
team names, logos or liveries.

## Fonts in textures

Labels on the schematic sheets, the cutting mat, the diorama plaque and turn plates, the tyre sidewalls, the dome study and the scan print are set in
Pillow's built-in default font (Aileron Regular, bundled with Pillow) and
rasterised into the texture atlas.
